How to Replace a UPVC Window Handle
You may have to replace the handle if it has broken. This is a simple task that can cost between PS5 and PS10.
Begin by opening the window handle to the unlocked/open position. Take off the screw cap. The screw cap is typically located above the handle, but it can also be found below.
Measure the Spindle Length
It is easy to change the window handle, however you must use the appropriate tools. Also, take your time. It is also essential to determine what kind of uPVC handle you have and determine the length of the spindle to ensure that you can find the correct replacement.
Typically the uPVC handle has a screw that secures it to the window frame. You can take it off by using a screwdriver. However, you should be cautious not to damage the locking mechanism. It is a good idea to use an electric screwdriver to prevent this from occurring.
Once you have removed the screw, you are able to remove the handle. Then, you can put in the handle and make sure that it is properly aligned with the wedge block. Check that the handle can close securely. This will help secure your home from intruders.
There are many uPVC handles that are available such as inline Espagnolettes, as well as tilt and turn handles. These handles are utilized for windows that can be opened by turning them or tilting them. If you are replacing the tilt and turn handle, you need to verify the length of the spindle before purchasing one, as different handles have varying sizes of spindle.
You can tell what type of handle it is by looking at the base. There should be a snap-in covering over an anchor screw that holds the base of the handle in place. You will then be able to see the screw holding the cockspur in place.
It is easy to replace your handle after you know the type you have. You are likely to find the exact handle at a local hardware store or online. It is important to remember that the handle you choose may not be exactly the same as the one you currently have. It is also important to consider the size of the spindle on the replacement handle to make sure it will fit in your window.
Remove the Old Handle
It's possible to replace your window handles if you notice that they are losing grip, or are becoming difficult to turn. Fortunately, this is an easy process that can be done in just few steps. Whether your windows are uPVC or old-style it is easy to install replacement handles. There are a variety of locks and handles, so you need to ensure that you select the appropriate one for your home.
The first step is to eliminate the old handle from your window. You can do this by removing the screws from the bottom of the window handle. Then with a screwdriver, remove the screws that hold the handle in place. When removing the handle from the window, take care not to scratch the frame or break the handle.
Next, you'll need to remove the spindle bar from the back of the handle. The spindle bar is usually secured by two screws which can be removed with a screwdriver. Once the screws have been removed, you can take the old handle from the window frame and also the locking mechanism.
After you have removed the handle, you'll have to find a new one that has the same spindle length. The right choice will ensure that it fits properly and that your windows are secure. If you're not sure which size handle to purchase, check your existing handle to determine what kind it is. There are many different types of uPVC handles. These include inline espagnolette, cranked and cranked and tilt and turn uPVC handles.
If you have espagnolette handles that are inline they will be equipped with a square 7mm spindle, which can be opened in either the right or left hand position. The same fixing center is used for both tilt and turn uPVC handles, but the blade's design differs - either angled or flat. Cockspur handles are long-nosed and latch onto the frame's outer or transom bars' cross member. You can replace them with cockspag block that are available in exactly the same sizes as the standard uPVC handles screws.
Install the New Handle
Over time, uPVC window handles can become weak or brittle due to regular usage and exposure to elements. Slamming or forcefully closing the handle may also cause strain and stress which can cause breakage of the mechanism. There are, however, easy fixes that can restore the functionality of the handle.
If the issue is related to the screws that hold the handle, the first step is to tighten the screws. Use a screwdriver to do this, making sure not to overtighten them since this could cause damage to the handle. It could be necessary to replace the screws if they are damaged or stripped.
In a lot of cases, the handle breaks due to it not being properly fixed or aligned with the window frame. In this case it is possible to reinstall your handle. It's a fairly simple process that should only take you a few moments to complete.
First, ensure the window is in an open position. Then, locate any screws that keep the handle in place. They are usually situated between the handle and the ceiling and are secured with caps made of plastic. Remove the caps and use a screwdriver to loosen top or bottom screws that hold the handle in place.
After the screws have been removed, you should be able to pull the handle away from the window mechanism. This should reveal the spindle which is a metal bar that fits into the handle and into the window lock mechanism. If the spindle is damaged it must be replaced before the handle can be installed.
The next step is to replace the handle. Begin by placing the handle on the window and marking the locations of the screw holes using the help of a pencil. Then, insert the new screws into the holes marked and tighten them manually at first. Make special info to tighten each screw slowly to ensure alignment, without damaging either the handle or window frame. Test the handle to ensure that it locks securely and runs smoothly.
Test the Handle
When you're trying to open and close your window, it's vital that the handle operates smoothly. It may be time to change the handles on your windows if they are not closing properly or are loos. The process of replacing your upvc window is relatively straightforward and simple.
On uPVC double-glazed windows there are numerous kinds of window handles. There are several types of handles designed for uPVC double-glazed windows. Each handle has a specific purpose and function, however they're all designed to provide a high level of security.
Before you purchase a new handle, it is necessary to identify the root of the issue. If the handle is loose it could be caused by a number of factors. In some cases, it may only require tightening. In other instances the issue could be more serious and require professional help. If this is the case, you should seek out a uPVC window expert for expert assistance.
The issue could be caused by an absence of maintenance or wear and wear and tear. If the handle seems a little looser it could be due to the fact that it has been shut and opened often. In such cases, you can usually tighten the screws that hold the handle to the window mechanism by using a screwdriver.
If the issue is more serious, it's likely that there is an obstruction or internal defect in the handle. Most uPVC handle problems result from internal cracks that prevent the handle from engaging with the spindle locking system. If this is the case, it's best to speak with a uPVC window specialist or local handyman to make sure that your window is functioning and secure.
It's a good idea to test the handle after having replaced it to ensure it functions smoothly and securely. You can do this by opening and closing the window several times to make sure it opens and locks easily. It is also important to grease your window's handle as well as locking mechanism periodically to ensure they are operating smoothly.